again.

.local/bin/ib/sb-battery

@@ -0,0 +1,37 @@
+#!/bin/sh
+
+# Prints all batteries, their percentage remaining and an emoji corresponding
+# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.).
+
+case $BLOCK_BUTTON in
+	3) notify-send "🔋 Battery module" "🔋: discharging
+🛑: not charging
+♻: stagnant charge
+🔌: charging
+⚡: charged
+❗: battery very low!
+- Scroll to change adjust xbacklight." ;;
+	4) xbacklight -inc 10 ;;
+	5) xbacklight -dec 10 ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# Loop through all attached batteries and format the info
+for battery in /sys/class/power_supply/BAT?*; do
+	# If non-first battery, print a space separator.
+	[ -n "${capacity+x}" ] && printf " "
+	# Sets up the status and capacity
+	case "$(cat "$battery/status" 2>&1)" in
+		"Full") status="⚡" ;;
+		"Discharging") status="🔋" ;;
+		"Charging") status="🔌" ;;
+		"Not charging") status="🛑" ;;
+		"Unknown") status="♻️" ;;
+		*) exit 1 ;;
+	esac
+	capacity="$(cat "$battery/capacity" 2>&1)"
+	# Will make a warn variable if discharging and low
+	[ "$status" = "🔋" ] && [ "$capacity" -le 25 ] && warn="❗"
+	# Prints the info
+	printf "%s%s%d%%" "$status" "$warn" "$capacity"; unset warn
+done && printf "\\n"

.local/bin/ib/sb-clock

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+clock=$(date '+%I')
+
+case "$clock" in
+	"00") icon="🕛" ;;
+	"01") icon="🕐" ;;
+	"02") icon="🕑" ;;
+	"03") icon="🕒" ;;
+	"04") icon="🕓" ;;
+	"05") icon="🕔" ;;
+	"06") icon="🕕" ;;
+	"07") icon="🕖" ;;
+	"08") icon="🕗" ;;
+	"09") icon="🕘" ;;
+	"10") icon="🕙" ;;
+	"11") icon="🕚" ;;
+	"12") icon="🕛" ;;
+esac
+
+case $BLOCK_BUTTON in
+	1) notify-send "This Month" "$(cal --color=always | sed "s/..7m/<b><span color=\"red\">/;s/..27m/<\/span><\/b>/")" && notify-send "Appointments" "$(calcurse -d3)" ;;
+	2) setsid -f "$TERMINAL" -e calcurse ;;
+	3) notify-send "📅 Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\`
+- Middle click opens calcurse if installed" ;;
+	3) "$TERMINAL" -e vim "$0" ;;
+esac
+
+date "+%Y %b %d (%a) $icon%I:%M%p"

.local/bin/ib/sb-internet

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Show wifi 📶 and percent strength or 📡 if none.
+# Show 🌐 if connected to ethernet or ❎ if none.
+# Show 🔒 if a vpn connection is active
+
+case $BLOCK_BUTTON in
+	1) "$TERMINAL" -e nmtui; pkill -RTMIN+4 dwmblocks ;;
+	3) notify-send "🌐 Internet module" "\- Click to connect
+❌: wifi disabled
+📡: no wifi connection
+📶: wifi connection with quality
+❎: no ethernet
+🌐: ethernet working
+🔒: vpn is active
+" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+if grep -xq 'up' /sys/class/net/w*/operstate 2>/dev/null ; then
+	wifiicon="$(awk '/^\s*w/ { print "📶", int($3 * 100 / 70) "% " }' /proc/net/wireless)"
+elif grep -xq 'down' /sys/class/net/w*/operstate 2>/dev/null ; then
+	grep -xq '0x1003' /sys/class/net/w*/flags && wifiicon="📡 " || wifiicon="❌ "
+fi
+
+printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/❎/;s/up/🌐/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/🔒/" /sys/class/net/tun*/operstate 2>/dev/null)"

.local/bin/ib/sb-iplocate

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+# Gets your public ip address checks which country you are in and
+# displays that information in the statusbar
+#
+# https://www.maketecheasier.com/ip-address-geolocation-lookups-linux/
+
+ifinstalled "geoip" || exit
+addr="$(curl ifconfig.me 2>/dev/null)" || exit
+grep "flag: " "${XDG_DATA_HOME:-$HOME/.local/share}/larbs/emoji" | grep "$(geoiplookup "$addr" | sed 's/.*, //')" | sed "s/flag: //;s/;.*//"

.local/bin/ib/sb-volume

@@ -0,0 +1,30 @@
+#!/bin/sh
+
+# Prints the current volume or 🔇 if muted.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e pulsemixer ;;
+	2) pamixer -t ;;
+	4) pamixer --allow-boost -i 1 ;;
+	5) pamixer --allow-boost -d 1 ;;
+	3) notify-send "📢 Volume module" "\- Shows volume 🔊, 🔇 if muted.
+- Middle click to mute.
+- Scroll to change." ;;
+	6) "$TERMINAL" -e vim "$0" ;;
+esac
+
+[ $(pamixer --get-mute) = true ] && echo 🔇 && exit
+
+vol="$(pamixer --get-volume)"
+
+if [ "$vol" -gt "70" ]; then
+	icon="🔊"
+elif [ "$vol" -gt "30" ]; then
+	icon="🔉"
+elif [ "$vol" -gt "0" ]; then
+	icon="🔈"
+else
+        echo 🔇 && exit
+fi
+
+echo "$icon$vol%"